Coefficient (Coef); Control Panel (Continued); Auto-Tuning (Pid Parameter Calibration) - Thermo Scientific HPS RT2 Advanced Manual

Auto-tuning (PID
Parameter Calibration)

Coefficient (COEF)

Thermo Scientific
Step 3 : Press the Stirrer Knob and select YES by turning the Stirrer Knob.
Press the Stirrer Knob again to start the auto-tuning
Step 4 : Terminate configuration mode as described in Configuration
Mode. To cancel the auto-tuning during the process, turn off the main
power switch. If cancelled, the Optimal Mode will be selected automati-
cally with an alarm.
Five user-selectable temperature control modes are provided for your
convenience.
Step 1: Press the CONFIG Button.
Step 2: Select temperature control mode selection
[CoEF] shown at right by turning the Stirrer Knob.
Step 3 : Turn the Stirrer Knob to check the five temperature control modes
in order. And select the desired mode by using the Stirrer Knob as
shown below.
Section 4
Control Panel
Digital Hotplate 4-24