Thermo Scientific HPS RT2 Advanced Manual page 8

Table of Contents

Advertisement

Section 1
Section title
1-2
Hotplate & Magenetic Stirrer
Indicates a hazardous situation which, if not avoided, may result in minor or
moderate injury.
Do not touch the top plate or any object near it even when the heater is
turned off. You may get burned due to residual heat.
After using this equipment, make sure to turn off the main power switch
and also to disconnect the power cord from the power outlet for the
safety of other users.
Do not place heavy objects, including this equipment, on top of the
power cord and do not strip, scratch, bend, twist, pull, or heat the
power cord. A damaged power cord is a fire and electrical shock hazard.
Make sure to set up this equipment on a flat, stable, clean, non-slip, dry,
and fireproof surface inside a lab with proper safety measures.
Do not place any device which can be affected by the motor vibrations
near this equipment.
Do not touch the power outlet, power socket, or power cord with wet
hands. And make sure to connect the power cord directly and firmly to
the power outlet and power socket.
Do not put or insert any objects (especially if conductive or flammable)
inside this equipment.
Do not expose this equipment to any heat sources including direct sun-
light.
Beware that mechanical shock or vibration can damage this equipment
and pay extra attention while moving it. Damages caused by mechanical
shock or vibration may result in injury or fire.
Do not impact the top plate or heat sink. You can damage the equipment
or get injured.
Do not install this equipment near any device that generates high fre-
quency noise such as high frequency welding machines, high frequency
sewing machines, or SCR power controllers.
Before cleaning, make sure to unplug the power cord to avoid electric
shock or fire.
Do not use chlorine bleach, ammonia-based cleaners, abrasives, ammonia,
or metal scouring pads. Wipe with a soft damped cloth or a sponge
soaked in water or diluted neutral detergent.
Use Caution -
Electric Shock
Use Caution -
Surface Temperature
Thermo Scientific

Advertisement

Table of Contents
loading

Table of Contents