Table of Contents
Advertisement
Section 4
Control Panel
Connecting Temp
Probe (continued)
4-4
Digital Hotplate
Temperature display windows are showed on "Sensor change" message.
After then, the display windows showed "Probe" measuring
temperature.
(4) In case of separating temperature probe from main body, the
temperature display windows are showed follow message;
• When you connect with temperature probe, check first hotplate temperature.
• When you connect with temperature probe and hotplate temperature is over
50°C, the "HOT TOP" LED will be lit.
• Pay attention to a high temperature.
• Set the Probe under 20mm from Media. If Probe is not set perfectly or on air,
the Probe will be "Error" or the hotplate will be overheating.
Thermo Scientific
Advertisement
Table of Contents
