Relocation; Keeping Product - Thermo Scientific HPS RT2 Advanced Manual

Section 6
Maintenance
Cleaning Product
(continued)

Relocation

Keeping Product

6-2 Hotplate & Magenetic Stirrer
Always make sure to keep top plate, main body, and accessories clean. Dirt
and other foreign substances can cause fire or electric shock. Before
attempting cleaning,
- Disconnect the power cord from the power outlet and ensure that the
equipment is cool enough,
- Wipe with a soft dry cloth first to remove any foreign matter. If not
enough,
- Wipe with a soft damp cloth or a sponge soaked in water or diluted
neutral detergent when necessary.
Note that cleaning is much easier if spills are attended to promptly.
If you need to move the equipment to another place,
(1) Disconnect the power cord from the power outlet,
(2) Pack the equipment and its accessories into the original packaging or
any other suitable container before moving
• Pay attention to avoid mechanical shock or vibration while moving instrument.
Damages caused by mechanical shock or vibration may result in injury or fire.
If you know you will not use this equipment for an extended period of
time,
(1) Disconnect the power cord from the power outlet and
(2) Clean the equipment with soft cloth.
(3) Pack the equipment properly and make sure to store it in dry place.
Thermo Scientific