Table of Contents
Advertisement
Checking Power
Connecting the
Temperature Probe
Thermo Scientific
(1) The following displays will appear in sequence together with a beep
sound when the power cord is connected:
Status
•
Note that the following display will also appear momentarily if the
main power switch is off:
(2) If you turn on the main power switch, the following display will appear
in sequence:
When the external temperature probe connects with body, the temperature
display part shows Probe measuring temperature. If the probe disconnect
with body, The temperature display part shows top plate temperature.
(1) Open the external temperature probe cap and turn right.
(2) Insert external temperature probe with body.
(3) When you connect with temperature probe, the LED lamp is
automatically
turned on.
Section 4
Control Panel
Hotplate & Magenetic Stirrer
4-3
Advertisement
Table of Contents
