Default (Defa) - Thermo Scientific HPS RT2 Advanced Manual

Default (DEFA)

Thermo Scientific
If you want to change the current settings back to the default settings
described in Selection of TImer Mode, do as follows:
Step 1 : Press the CONFIG Button.
Step 2 : Select the default setting [dEFA] shown
below by turning the Stirrer Knob.
Step 3 : Press the Stirrer Knob and confirm the change to the default set-
tings by using the Stirrer Knob as shown below:
[When you need to save the changes]
If you don't want to save it, press the Stirrer Knob when display shows
"SAVE NO". [When you don't need to save the changes]
Step 4: Terminate configuration mode as described in Configuration
Mode.
Section 4
Control Panel
Digital Hotplate 4-26