Table of Contents
Advertisement
Features
Thermo Scientific
Functional Description
Section 2
HPS RT2 Advanced model offers to show temperature and control by
external temperature probe. Above models boast quick heat-up time thanks
to ample heating capacity as well as the superb heat transfer rate enabled
by the tightly integrated structure of the heater and the ceramic-coated
aluminum alloy top plate. Also provides a variety of temperature modes
relating to temperature control, heat-up time.
•
By adopting a special magnet with exceptionally strong magnetic
coupling power as well as smooth-start stirring mechanism. You will
experience virtually no decoupling of magnetic stir bars even with
viscous media or at high speeds (30~2000rpm, guaranteed). The
BLDC motor and the special magnet also provide big stirring power.
•
Real-time stirring with quick operation or stop
•
When the external temperature probe is coupled, it automatically
changes to external sensor mode. User can check media temperature
also control.
•
Microprocessor PID Feedback Control - Fast and precise temperature
control is provided by the microprocessor PID controller.
•
Selection of the Temperature Control Modes - Three user-selectable
temperature control modes are provided for your convenience;
Optimum, Fast, and Slow.
•
Auto-Tuning - Automatic tuning of the PID parameters provides more
accurate temperature control.
•
Changing Temperature Limit - The top plate temperature control
range can be changed to protect media by changing overtemperature
limit value or low temperature limit value.
•
Offset - To use your own thermometer for temperature control in
specific applications, there can be some differences between the
temperature of your thermometer and the displayed temperature of this
unit. If needed, you can offset such temperature differences ranging
from -10°C to ±50°C at 0.1°C intervals.
Hotplate & Magenetic Stirrer
2-1
Advertisement
Table of Contents
