Table of Contents
Advertisement
Thermo Scientific
Warnings and Cautions
Section 1
Ignoring the following warnings could cause serious injuries or even fatal
accidents.
Check and connect properly -the voltage, phase and capacity of power
supply on the ID plate before installation.
Power supply must be properly grounded. Abnormal grounded connection
causes serious damage. Grounded connection must not be on the water
pipe and gas pipe.
Use correct and provided power code
Do not install the product in the place that the gas could leak out. Do not
use in the place that has industrial oil smoke and/or metallic dust. It
causes fire or electric shock.
Do not use the machine near to places where explosion can occur due to
organic evaporating gases.
Explosive materials: Acid, Esther, Nitro compound.
Inflammable materials: salt peroxides, inorganic peroxide, salt acids.
Check equipment for permissible environmental condition. It can be the
cause fire or trouble by electricity, electronic, and damage of motor.
Permissible environmental condition - Temperature 2°C to 60°C,
Maximum relative humidity 80%.
Wear your personal protective equipment in accordance with the hazard
category of the medium to be processed; splashing liquids, projectile
parts, body parts, hair, clothing and jewelery getting caught.
Unplug, if there is strange sound, smell and smoke from the product. Stop
operating and request service.
Keep out of direct sunlight. It may influence product life and proper oper-
ation.
Do not use the machine in places where moisture is high and flooding can
occur.
Do not assemble, repair, modify on your own. The product may not work
well and electric shock in the efficiency of the product. Also you will
void the warranty.
Hotplate & Magenetic Stirrer
1-1
Advertisement
Table of Contents
