Resetting Set Temp During Operation - Thermo Scientific HPS RT2 Advanced Manual

Section 4
Control Panel
Resetting Set Temp During
Operation
4-8 Digital Hotplate
Step 1 : Press TEMP Button during operation.
Step 2 : Select the desired temperature by turning and press the Heater
Knob.
After 15 seconds, the mode will be escaped automatically.
Or push RUN/STOP Button as shown below to escape the mode.
Step 1 : Push RUN/STOP Button during resetting the set temperature.
Step 2 : Turn the Heater Knob clockwise and press the Heater Knob as
shown below.
Thermo Scientific