Selection Of The Timer Mode - Thermo Scientific HPS RT2 Advanced Manual

Section 4
Control Panel
Selection of the Timer
4-16 Digital Hotplate
Two different timer modes are provided: Immediate Timer Activation (ti1)
and Delayed Timer Activation (ti2). In case of the Immediate Timer
Mode
Activation, timer starts immediately after setting the timer. In case of the
Delayed Timer Activation, on the other hand, timer is activated only when
the set temperature is reached.
The timer mode selection procedures are as follows:
Step 1: Press the CONFIG Button.
Step 2 : Select the timer mode shown below by turning and pressing the
Stirrer Knob.
Step 3 : If you want to change the timer mode, then turn and press the
Stirrer Knob.
Step 4 : Save the desired timer mode by using the Stirrer Knob as shown
below. [When you need to save the changes]
Thermo Scientific