Temperature Setting - Thermo Scientific HPS RT2 Advanced Manual

Section 4
Control Panel
Run / Stop Button
(continued)

Temperature Setting

4-6 Digital Hotplate
• Hot Top Warning Indicator will illuminate if the top plate temperature is over
50°C.
• Be aware and careful of surface temperature.
• Even if the instrument is turned off, the surface of the top plate and the ves-
sel on top of it will remain very hot for some time. Never leave your instru-
ment accessible to others while it is hot and never touch it unless you are
absolutely sure.
• You can check set temperature during heater operating. Press the heater
knob.
• In case of user requirements, press TEMP button to change set temperature
during operating.
• User can check the elapsed time during operation by pressing TIMER button.
• If user wants to go TIMER setting mode during operation, just press timer but-
ton one more time.
The temperature setting procedures are proceeded by using TEMP button
and the Heater Knob(left control knob).
Step 1: Press the TEMP Button and check the display showing the current
temperature setting.
Step 2: If you want to change the temperature setting, select the desired
temperature by turning and press the Heater Knob.
Thermo Scientific