INVT Goodrive20-UL VFD Series Operation Manual page 84

Goodrive20-UL Series VFD
Function
Name
code
UP
terminals
P08.45 frequency
changing
ratio
DOWN
terminals
P08.46 frequency
changing
ratio
Action
selection
P08.47
at power
loss
Most
significant
digit of
P08.48 original
power
consumpti
on
Least
significant
P08.49
digit of
original
Description
Hundreds place: action selection when stop
0: Setting valid
1: Valid in the running, clear after stop
2: Valid in the running, clear after receiving the
stop commands
0.01–50.00s
0.01–50.00s
0x000–0x111
Ones place: Action selection when power off.
0: Save when power off
1: Clear when power off
Tens place: Action selection when Modbus set
frequency off
0: Save when power off
1: Clear when power off
Hundreds place:The action selection when
other frequency set frequency off
0: Save when power off
1: Clear when power off
This parameter is used to set the original value
of the power consumption.
The original value of the power consumption
=P08.48 x 1000 + P08.49
Setting range of P08.48: 0–59999 kWh (k)
Setting range of P08.49:0.0–999.9 kWh
-79-
Function parameters
Default Modify
○
0.50 s
○
0.50 s
○
0x000
○
0 kWh
○
0.0 kWh