INVT Goodrive20-UL VFD Series Operation Manual page 43

Goodrive20-UL Series VFD
Function
Name
code
FWD/REV
running
P01.13
deadzone
time
Switching
between
P01.14
FWD/REV
rotation
Stopping
P01.15
speed
Detection
of
P01.16
stopping
speed
Description
ACC
P01.04
P13.14
P01.23
Setting range of P01.09: 0.00Hz–P00.03 (Max.
output frequency)
Setting range of P01.10: 0.00–50.00s
Setting range of P01.11: 0.0–100.0% (rated
current peak of the VFD)
Setting range of P01.12: 0.00–50.00s
This function code indicates the transition time
specified in P01.14 during FWD/REV rotation
switching. See the following figure.
Output frequency f
Forward
Starting
frequency
Setting range: 0.0–3600.0s
Set the threshold point of the VFD:
0: Switch after zero frequency
1: Switch after the starting frequency
2: Switch after the speed reach P01.15 and
delay for P01.24
0.00–100.00Hz
0: Detect at the setting speed
1: Detect at the feedback speed (valid only for
vector control)
P01.09
P13.14
Constant
speed
DEC
P01.12
P0110
In running
Switch over after
starting frequency
Switch over after
zero frequency
Deadzone
Reverse
time
-38-
Function parameters
Default
t
0.0s
Time t
1
0.50Hz
1
Modify
○
◎
◎
◎