Running Mail With A Combined Barcode Label Job - Pitney Bowes SendPro P Series User Manual

3. Select the class from the Class services list box, for example, First Class.
4. Select the mailpiece type, for example, Letter.
5. Select the Electronic Certified special service from the Extra services list on the right. As soon
as you select the service, a check mark appears in front of it
6. You are prompted to enter a ZIP Code. Scan the combined barcode label and select OK.
7. Scan the next tracking label to be used.
If you have used all of the labels in a series of tracking number labels, make sure you start
l
with the top label with the lowest last 4-digits and not the bottom label with the highest last 4-
digits.
8. Select Electronic Return Receipt from the Extra services list.
9. Select OK.
10. Scan the combined barcode label. The Customer Reference Number will appear in the Mail
Information list box on the left side of the screen.
11. Save the job.
a. Select Save as.
b. Enter a new job name (e.g. ERR Job) and then select OK.
12. Select the Tape button to print a tape. To print postage on the piece of mail, select the Start
button.
Note:
If you have accounting on your system, make sure you have selected an account for this job
or you will not be able to print postage.
13. Remove the piece of mail or package from the scale. Apply the tracking label, combined
barcode label and postage tape.
14. The system provides you with the option of automatically printing a receipt after every mailpiece.
Select the appropriate option to continue.
15. The system will ask you if you want to track another package. Select No to complete the job.

Running mail with a combined barcode label job

Follow the steps below to run mail with a job that will allow you to scan the combined barcode label.
Pitney Bowes User Guide April 2022
Running mail
93