Pitney bowes inc. all in one printer user manual (140 pages)
Summary of Contents for Pitney Bowes SendPro P Series
Page 1
SendPro P Series Printer ® Installation Instruction 1E42 Read Now BEFORE you unpack your equipment Continue reading below Right, let’s get your Printer up and running quickly… Before proceeding with the installation of your SendPro P Series Printer, ® please ensure that your software is at version 25 or later. The version can be found on the bottom right hand corner of the start up screen.
Opening the box and unpacking Here’s a diagram and explanation of the items you should find in your box. Please select the correct power cable for your location. If you have any problems during this installation, refer to the online help available. Printer Network Cable (for network...
Connecting the USB Cable Connect the USB cable to your Printer. Connect the Printer Ensure you have the correct power cord for your region. Connect the power cord and adapter (as shown) to your printer and switch on. Power Cable Printer Ready Wait for approximately 45 seconds until the green light remains constant and the printer is ready.
Page 4
Creating a Label 1. Select the Print Shipping Label button from the Home screen. 2. Select the Carrier icon required. 3. Type in the Recipient’s Postal Code in the To field or click on the Address Book icon to select a recipient address previously saved to Address Book. Note- The Postal Code entered must be in the correct format before SendPro™...
Page 5
Follow normal safety precautions for all office equipment: • Use only Pitney Bowes approved supplies, in particular aerosol dusters. Improper storage and use of aerosol dusters or flammable aerosol dusters can cause an explosive-like condition that could result in personal injury and/or property damage.