Using Key In Postage Mode - Pitney Bowes SendPro P Series User Manual

Running mail
If you set the threshold too low, you may be prompted to return a piece of mail to the scale. This
l
will happen if the weight cannot be recorded properly due to bounce on the scale.
Tip: Weigh the lightest piece of mail in the stack and set a threshold below that value.
To edit the Differential weighing threshold:
1. Ensure that the appropriate job is open and selected on the Run Mail screen.
2. Select the Weighing icon.
3. Select Differential weighing.
4. Select Edit threshold.
5. Type in the appropriate threshold.
6. Select OK. The system returns you to the weighing method dialog box.
7. Select OK to return to the Run Mail screen.

Using Key in Postage mode

You can manually enter postage for any of your postal jobs. This is called Key in Postage.
Note:
You cannot save any job that uses key in postage as the default job. The default job must have a
class selection so it will be automatically updated when postage rates change.
1. Select the Run Mail button on the Home screen.
2. Ensure that the appropriate job is open.
3. Select Key in Postage at the bottom of the screen.
4. Type in the postage amount and select OK.
Pitney Bowes User Guide April 2022 64