Pitney Bowes SendPro P Series User Manual page 196

Note:
Always make sure there is nothing on the scale when the system is powered up. At power up, the
system will automatically zero the scale.
1. Select Settings under Mailing on the Home screen.
2. Select Hardware from the list on the left side of the screen.
3. Select Attached scale.
4. Select Zero scale.
5. Select the Home button to return to the Home screen.
Resetting the localization value
When you replace your attached scale, you are required to reset the localization value for the scale.
Refer to the installation instructions supplied with the scale for instructions on resetting the localization
value.
Setting the WEIGH-ON-THE-WAY® (W-O-W®) weight limit
You can set the WEIGH-ON-THE-WAY (W-O-W) weight limit to prevent the system from printing
postage on pieces of mail that exceed a set weight.
1. Select the Run Mail button in the Mailing tile on the Home screen.
2. Select the Weighing icon.
3. Select WEIGH-ON-THE-WAY (W-O-W).
4. Select the lbs field.
a. Use the numeric keypad to type in the weight in lbs.
b. Select the oz. field and type in the appropriate weight.
c. Select OK.
5. Select the Home button to return to the Home screen.
Pitney Bowes User Guide April 2022
System Setup
196