Replacing The Printhead - Pitney Bowes SendPro P Series User Manual

Maintenance
6. Hold the ink cartridge with the label facing upright and push into place.
7. Close the ink cartridge cover.
8. Select Print test pattern.
9. Check the test sample. If the lines are solid and unbroken, the sample is acceptable.
10. Select Image is OK - Done.

Replacing the printhead

If you have cleaned the printhead and changed the ink cartridge and the print quality of the test sample
is still not satisfactory, replace the printhead.
1. Select Settings under Mailing on the Home screen.
2. Select Hardware.
3. Select Printer.
4. Select the Print head tab.
5. Select the Install new... button.
Pitney Bowes User Guide April 2022 208