Pitney Bowes SendPro P Series User Manual page 202

Maintenance
You can also try removing the power cord then plug it into another working wall outlet.
Solution 2: Check the power lights and switches
There is a power button located on the lower left side of the feed deck. A blue light should illuminate
when the switch is in the on position. . If the blue light is off, press and release the button to turn the
system on.
On newer models, a power switch is also fitted at the back of your device. A green light should
illuminate when the switch is in the on position. If the green light does not illuminate, please contact
service personnel for support.
Pitney Bowes User Guide April 2022 202