Pitney Bowes SendPro P Series User Manual page 89

Selecting a tracking service
Tracking services are available when you use the Attached Scale, or Manual Weight entry method.
The following steps are based on using Priority class and the Electronic Delivery Confirmation service.
Your procedure may vary slightly depending on the class and service you choose. If you are using
Electronic Certified service with the Electronic Return Receipt (ERR) option, refer to How to use
Electronic Return Receipt (ERR).
1. Place the piece of mail or package on the scale.
2. Select Class from the Mail Information list on the left side of the screen.
3. Select the class from the Class services list box, in this example, Priority Mail Retail.
4. Select the mailpiece type, in this example, Envelope or package.
5. You are prompted to type in the Destination ZIP or Zone code. Type in the ZIP code and then
select This is a ZIP.
6. Select the special service from the Extra services list on the right. For this example, use
Electronic Delivery Confirmation. As soon as you select the service, a check mark appears in
front of it and you are prompted to type in the tracking number.
If this is the first time you are entering a confirmation service, the field for the tracking
l
number is blank and you need to type in the entire number. If you have a barcode scanner,
you can scan in the number.
If you have used all of the labels in a series of tracking number labels, make sure you start
l
with the top label with the lowest last 4-digits and not the bottom label with the highest last 4-
digits.
If you have used the confirmation service before, the next tracking number (in the series of
l
tracking number labels) appears, minus the last digit. You will be prompted to type in the last
digit of the tracking number that is to be used on the mailpiece.
Pitney Bowes User Guide April 2022
Running mail
89