Safety; Intended Use; System Requirements; Safety Regulations - Pilz PNOZmulti Mini Operating Manual

Safety

3 Safety
3.1

Intended use

The configurable small control systems PNOZmulti are used for the safety-related interrup-
tion of safety circuits and are designed for use in:
} E-STOP equipment
}
Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
The coated version of the product PNOZ mm0p-T is suitable for use where there are in-
creased environmental requirements (see
The following is deemed improper use in particular:
}
Any component, technical or electrical modification to the product
}
Use of the product outside the areas described in this manual
} Use of the product outside the technical details (see
3.2

System requirements

Please refer to the "Product Modifications" document in the "Version overview" section for
details of which versions of the PNOZmulti Configurator can be used for this product.
3.3

Safety regulations

3.3.1

Safety assessment

Before using a unit it is necessary to perform a safety assessment in accordance with the
Machinery Directive.
Functional safety is guaranteed for the product as a single component. However, this does
not guarantee the functional safety of the overall plant/machine. In order to achieve the re-
quired safety level for the overall plant/machine, define the safety requirements for the
plant/machine and then define how these must be implemented from a technical and organ-
isational standpoint.
Operating Manual PNOZ mm0p-T
1002704-EN-02
CAUTION!
Inputs and outputs for standard functions must not be used for safety-re-
lated applications.
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
Technical details [ 24]).
Technical details [ 24]).
10