8
Setting Attenuation and/or Power Levels
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
All manuals and user guides at all-guides.com
This chapter explains how to use the Agilent 8163A/B Lightwave
Multimeter, Agilent 8164A/B Lightwave Measurement System, or
Agilent 8166A/B Lightwave Multichannel System together with the
8157xA family of Variable Optical Attenuator modules to attenuate and
control optical power in single-mode optical fibers.
Here you will find:
• A brief description of the modular Agilent 8157xA Variable Optical Attenuator
family,
• A description of how to use these modules, including applying an attenuation
factor, setting an output power, applying offset factors, constructing a l offset
table, and (for the 81576A and 81577A) using the power control feature.
The User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
your test setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
197