Claims And Repackaging; Return Shipments To Agilent Technologies - Agilent Technologies 8163A Manual

Claims and Repackaging

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
All manuals and user guides at all-guides.com

Claims and Repackaging

If physical damage is evident or if the instrument does not meet
specification when received, notify the carrier and the nearest Agilent
Technologies Sales/Service Office. The Agilent Technologies
Sales/Service Office will arrange for repair or replacement of the unit
without waiting for settlement of the claim against the carrier.

Return Shipments to Agilent Technologies

If the instrument is to be shipped to a Agilent Technologies Sales/Service
Office, attach a tag showing owner, return address, model number and full
serial number and the type of service required.
The original shipping carton and packing material may be reusable, but the
Agilent Technologies Sales/Service Office will provide information and
recommendation on materials to be used if the original packing is no
longer available or reusable. General instructions for repackaging are as
follows:
• Wrap instrument in heavy paper or plastic.
• Use strong shipping container. A double wall carton made of 350-pound test
material is adequate.
• Use enough shock absorbing material (3 to 4 inch layer) around all sides of the
instrument to provide a firm cushion and prevent movement inside container.
Protect control panel with cardboard.
• Seal shipping container securely.
• Mark shipping container FRAGILE to encourage careful handling.
• In any correspondence, refer to instrument by model number and serial
number.
Installation and Maintenance
317