Safety Precautions - Agilent Technologies 8163A Manual

Safety Precautions

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
All manuals and user guides at all-guides.com

Safety Precautions

Please follow the following safety rules:
• Do not remove instrument covers when operating.
• Ensure that the instrument is switched off throughout the cleaning procedures.
• Use of controls or adjustments or performance of procedures other than those
specified may result in hazardous radiation exposure.
• Make sure that you disable all sources when you are cleaning any optical
interfaces.
• Under no circumstances look into the end of an optical device attached to
optical outputs when the device is operational. The laser radiation is not visible
to the human eye, but it can seriously damage your eyesight.
• To prevent electrical shock, disconnect the instrument from the mains before
cleaning. Use a dry cloth, or one slightly dampened with water, to clean the
external case parts. Do not attempt to clean internally.
• Do not install parts or perform any unauthorized modification to optical
devices.
• Refer servicing only to qualified and authorized personnel.
Cleaning Instructions
423