Agilent Technologies 8163A Manual page 413

DFB Laser Sources
error message
description
test value
action
error message
description
test value
action
error message
description
test value
action
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
All manuals and user guides at all-guides.com
E10060: Laser <a> control failed (b, c, d, e)
Checks the laser current source
a
b
c
d
e
Please return the unit to your local service center for repair
E10080: Laser <a> control for safety test failed
To test the current safety comparator the laser current needs to
be set to two different values
a
Please return the unit to your local service center for repair
E10081: Safety comparator <a> test failed (b, c)
Checks whether laser current safety comparator includes at the
right conditions a safety interrupt at the CPU
a
b
c
Please return the unit to your local service center for repair
laser number
measured current at low per and normal current source
setting
measured current at low power and high current source
setting
measured current at high power and normal current
source setting
measured current at high power and high current source
setting
laser number
laser number
shows whether the interrupt flag was raised when the
current was lower than the limit
shows whether the interrupt flag was raised when the
current was higher than the limit
Error Messages
413