Error Messages
error message
description
test value
action
error message
description
test value
action
error message
description
test value
action
error message
description
test value
action
error message
description
test value
action
420
All manuals and user guides at all-guides.com
InitKey(): unsupported keyLocation
KeyAck(): unsupported keyLocation
KeyEnable(): unsupported keyLocation
KeyDisable(): unsupported keyLocation
KeySelftestPre(): unsupported keyLocation
KeySelftestExec(): unsupported keyLocation
KeySelftestPost(): unsupported keyLocation
Calibtation data incorrect
Please return the unit to your local service center for repair
Preset (0) failed
Preset(): channel X, config Y failed
Preset failed, probably due to incorrect calibration data
X module channel
Y switch configuration number
Please return the unit to your local service center for repair
Error checking firmware CRC!
The firmware CRC is wrong
Please return the unit to your local service center for repair
Unknown internal error during init
Error with unknown cause occured
Please return the unit to your local service center for repair
InitDefaultCaldata(): couldn't alloc defaultCalData
InitDefaultCaldata(): only 2 channels supported in default caldata
InitDefaultCaldata(): unknown type
This only occurs when running special debug software
Please return the unit to your local service center for repair
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
Optical Switch modules