Mainframes
NOTE
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
All manuals and user guides at all-guides.com
Mainframes
After initializing the instrument, the following bootup screen appears, listing all
selftests of the instrument.
A FlashDisk selftest failure may occur after a firmware download to the
instrument and is of no harm. No reboot is necessary for operation of the
mainframe. However, after a reboot of the instrument, the FlashDisk test will pass
again.
8163A
<Fw Rev>
ProductNo(SerialNo)Selftest:
** HW Revision <HWRevNo>
** SYSBIOS
<SysBiosRevNo> <Date>
** EXTBIOS
<ExtBiosRevNo> <Date>
** FPGA
<FPGARevNo> <Date>
** BRAM
<BRAMSize>-<passed/failed>
** FlashDisk <FlashSize>-<passed/failed>
If one of the selftests fails, please try to reboot the instrument. If the selftest
continues to fail, please return the mainframe to your local service center for
repair.
Error Messages
383