Agilent Technologies 8163A Manual page 415

Attenuator Modules
error message
description
test value
action
error message
description
test value
action
error message
description
test value
action
error message
description
test value
action
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
All manuals and user guides at all-guides.com
E1060: 0.25V offset failed (a, b)
Verifies that the offset voltage for the 16-bit ADC (250 mV) is cor-
rectly added to the input signal
a
b
Please return the unit to your local service center for repair
E10061: PGA DAC adj failed (a, b, c)
Tries to adjust the offset voltage of the PGA
a
b
c
Please return the unit to your local service center for repair
E10062: PGA gain adj failed (a, b, c)
Verifies the gain settings of the PGA (x 1/10/100). A voltage of 25
mV is applied to the input of the PGA and then amplified
a
b
c
Please return the unit to your local service center for repair
E10063: Lambda Dac adj failed (a, b, c, d)
Verifies the gain of the responsiveness correction stage
a
b
c
d
Please return the unit to your local service center for repair
shows the ADC reading
shows the maximum difference to the exact ADC reading
of 3277
shows the ADC Offset reading
shows the limit for an upper offset
shows the limit for a lower offset
if 1, the required division has failed
if 0, the calculated factors are correct
shows the measured values for an amplification by 10
shows the measured values for an amplification by 100
if 1, the quotient d could not be calculated, otherwise 0
shows the difference between DAC settings 1024 and
2048
shows the difference between DAC settings 2048 and
4096
shows the quotient of b divided by c
Error Messages
415