On-Screen Messages; Table 17 Stability Application On-Screen Messages - Agilent Technologies 8163A Manual

The Stability Application

Table 17 Stability Application On-Screen Messages

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
All manuals and user guides at all-guides.com

On-Screen Messages

The messages listed in the table below may appear at the top of the screen
during the Stability application.
Agilent 8163A/B
Message
OvR
NoH
NoD
Agilent 8164A/B Description
Message
Overrange One of the Power Meter channels has re-
ported an overrange. The over-ranged val-
ue is clipped, statistical data is invalid.
No Head There is an Optical Head Interface module
inserted in the mainframe that does not
have an Optical Head connected to it. No
measurement is possible using this chan-
nel until you either:
• reconnect an Optical Head or
• deselect this Optical Head channel as a
power measurement channel.
No Data No data has been measured or measure-
ment is not yet finished. You cannot ac-
cess the Analysis Screen yet. Printout and
file operations are not yet possible.
Applications
265