Table of Contents
Advertisement
Chapter 2
9. Proceed to the "Connect the Steering Valve Harness" below topic to continue with the
OMNiDRIVE™ installation.
Note:
It may be recommended to wait to reassemble the steering column until after
the brakes have been fully calibrated after the system is fully installed.
Connect the Steering Valve Harness
Recommended Tools
2" hole saw (optional)
l
OMNiDRIVE™ System Diagram - Tractor
Locate the steering valve. The steering valve may be mounted on either the left or right side
of the tractor in front of the rear axle.
88
Advertisement
Table of Contents
