Table of Contents
Advertisement
Start an Operation
Note:
OMNiDRIVE™ operations require both an active CR7™ job and an OMNiDRIVE™ user
interface operation to be able to command the grain cart during autonomous operation.
Start a CR7™ Job
Note:
The CR7™ job creates a harvest coverage map which is used by the OMNiDRIVE™
system to plan routes around unharvested crop. Any non-controlling combines can join the
active job to add to the same coverage map and allow the OMNiDRIVE™ system to
accurately plan routes based upon current harvested areas.
Review the
CR7™ Operation Guide
field computer.
Start an OMNiDRIVE™ Operation
1. Select the desired field within which to operate the OMNiDRIVE™ system.
Note:
To add a field, select the Add Field button and refer to "Field Boundary Set Up"
on page 243 for assistance with creating or uploading boundaries for OMNiDRIVE™
operations.
for additional assistance with starting a job on the CR7™
Autonomous Operation Overview
246
Advertisement
Table of Contents
