Table of Contents
Advertisement
MOUNT THE HDU
FIGURE 17. HDU Installed on HDU Mounting Bracket
1. Install the HDU (P/N 063-0173-887) on the HDU mounting bracket (P/N 107-0172-543) using two 1/4"-20
flanged lock nuts (P/N 312-1001-168).
FIGURE 18. HDU Mounting Bracket Installed
2. Secure the HDU mounting bracket in the access panel so that the HDU faces the cab wall using the existing
mounting studs and four M6 flanged lock nuts (P/N 312-4000-216).
INSTALL THE VALVE HARNESS CABLE
1. From beneath the cab, connect the round, 31-pin connector of the valve harness (P/N 115-4010-058) to the
mating 31-pin connector of the bulkhead harness cable (P/N 115-4010-057).
016-5032-103 Rev. D
CAB COMPONENT INSTALLATION
33
Advertisement
Table of Contents
