Table of Contents
Advertisement
4. In the Connection Point drop down list, select
configures the RS Lite for the types of radio data to transmit or receive during
autonomous operation.
5. Ensure the Radio Channel drop down is set to Hop and the Radio Transmit (TX)
Power is set to a value of 15.
6. Use the drop down list to set the number of Non-Controlling Combines present during
field operations.
Note:
This value must be set on the Radio Link tab on each machine in the
OMNiDRIVE™ system (e.g. the tractor, the controlling combine, and each
controlling combine
7. Power cycle the machine.
Configure the CR7™ Machine
Note:
The following steps must be completed in the Settings menu on the Raven CR7™
field computer. The CR7™ Operation Guide (P/N 016-0171-664) may be found
the Raven Industries Applied Technology web site.
1
The combine that may assign paths to, and may sync with, the OMNiDRIVE™ tractor. One
controlling combine is required for all OMNiDRIVE™ locations.
2
A combine operating with the OMNiDRIVE™ tractor and controlling combine. A non-
controlling combine may share harvest coverage data to the coverage map during a harvest
job, but cannot sync with or plan routes for the OMNiDRIVE™ tractor.
2
).
Controlling Combine
1
. This setting
non-
here
or on
226
Advertisement
Table of Contents
