Table of Contents
Advertisement
5. Secure the RAM® socket arm to the base plates to mount the tablet above the OEM
display.
Note:
The display bracket and socket arm may be rotated to mount the tablet next to
the OEM display.
Mount the Slingshot® Field Hub and Ethernet Switch
Note:
The
CR7™
and
mounting and connecting these components. These manuals are available at
https://portal.ravenprecision.com
documents when installing the OMNiDRIVE™ system.
1
International Mobile Equipment Identity
Field Hub
manuals offer best practices and considerations for
or by using the links above. Please refer to these
The information affixed to the bottom of the Field Hub will be
required to activate the device and provision the OMNiDRIVE™
system. Before mounting the Field Hub, it is strongly
recommended to remove the SIM card and modem labels affixed
to the bottom of the modem. Store this information in a safe
location or on the top of the modem temporarily. Take a photo
1
of the
IMEI
information on the bottom of the Field Hub.
NOTICE
Installation Overview
35
Advertisement
Table of Contents
