Chapter 2
Note:
The Lockout Switch cable will connect to the 8R base harness (P/N 115-2610-
054). Refer
5. Proceed to the "Mount and Connect the Radar Assembly" on page 91 topic to proceed
with the installation process.
Install the Brake System and Clutch Harness
Recommended Tools
Metric socket set - 5 to 24 mm
l
Metric wrenches
l
Metric Allen wrenches - up to 8 mm
l
Large flat head screw driver
l
OMNiDRIVE™ System Diagram - Tractor
80