Connect Combine Omnidrive™ System Cables; Roof Connections; Rs Lite And Starfire™ Connections - Raven OMNiDRIVE Installation And Operation Manual

10. Proceed to the "Connect Combine OMNiDRIVE™ System Cables" below for assistance
with the final connections to the roof array and antenna components of the
OMNiDRIVE™ system on the combine.
Connect Combine OMNiDRIVE™ System Cables
Note: During the installation process, note the serial number and bar code of the following
devices and the machine on which each device is installed:
Slingshot®Field Hub
l
RS Lite
l
CR7™
l
This information will be required during device registration and field provisioning
procedures and will help locate each device within the Slingshot® portal.
Note: Please allow up to 4 business days to activate the Field Hub. Once activation has been
completed, a confirmation email will be sent to the customer and an
will be pushed to the Field Hub the next time the device powers up. It may be recommended
to complete and submit the
machines. Refer to the following for additional assistance:
"Activate the Slingshot® Field Hub for the OMNiDRIVE™ Tractor" on page 147
l
"Activate the Slingshot® Field Hub for the OMNiDRIVE™ Combine" on page 198
l
OMNiDRIVE™ System Diagram - Combine

Roof Connections

RS Lite and StarFire™ Connections
1. Locate the 12-pin plug labeled RS Lite on the RS Lite to StarFire™ cable (P/N 115-2610-
060) and connect to the port on the RS Lite.
1
(Over the Air) Software updates and other information pushed from Slingshot® servers via
the Slingshot® system.
2
Online Activation Form
2
OLAF procedures for the Field Hub on all OMNiDRIVE™
Installation Overview
1
OTA software update
47