Table of Contents
Advertisement
Chapter 4
Confirm that the status LED on each E-Stop returns to green.
l
E-Stop Status LED
Color
Green
Yellow
Red
Blue
Purple
Off
7. Repeat these steps to test each E-Stop in the OMNiDRIVE™ system individually.
Connect to the OMNiDRIVE™ User Interface
Connect to the RS Lite WiFi Network
1. Access the OMNiDRIVE™ tablet and select the OMNiDRIVE™ user interface shortcut.
2. Use your Slingshot® login credentials to access your account.
Note:
Review the "Field Provisioning Overview" on page 144 procedures for additional
assistance with creating a Slingshot® account for use with an OMNiDRIVE™ system.
241
Description
E-Stop is on and receiving TIB communication.
Tractor E-Stop is functional and receiving
messages via the radio.
Indicates that this E-Stop is active.
Another E-Stop has been activated.
No communication with the TIB
E-Stop is in sleep mode or the battery is
depleted.
Press the power button on the E-Stop to
l
wake up the device.
Charge the E-Stop to restore normal oper-
l
ation.
Autonomous
Operation
Ready or Active
Ready or Active
Disabled
Disabled
Not Shown
Not Shown
Advertisement
Table of Contents
