Fuel Dispensers TATSUNO EUROPE ‐ Installation and User Manual , revision 10, January 2022
2.5.16. OCEAN TOWER LPG DISPENSERS
OCEAN TOWER LPG dispensers are produced only in the remote (pressure) version, i.e. without pump, in
one‐sided left (L), one‐sided right (R) or double‐sided (D) version with one to four dispensing hoses for
dispensing LPG (liquefied propane‐butane). The dispensing hoses are freely hung or equipped with a reel
(see models marked "‐HR") and are terminated by dispensing nozzles located from the front of the
dispenser.
List of standard OCEAN TOWER LPG dispenser models:
Model stojanu
BMP4011.OWL(R) /LPG
BMP4011.OWL(R) /LPG‐HR
BMP4012.OWD /LPG
BMP4012.OWD /LPG‐HR
BMP4022.OWD /LPG
BMP4022.OWD /LPG‐HR
BMP4022.OWL(R) /LPG‐2C
BMP4022.OWL(R) /LPG‐2C‐HR
BMP4034.OWD /LPG‐4C
BMP4034.OWD /LPG‐4C‐HR
Notes: The filling performance depends on the conditions at the station (distance from the LPG pump, LPG pump pressure..., etc.).
The standard filling capacity for models with one inlet, one hose (11) and two inlets, two hoses (22) is 50 L/min. For models with
one inlet, two hoses (12), the output capacity is 35 L/min. Please note that exceeding the maximum operating pressure of 18 bar
(0.18MPa) may result in higher filling capacity but also insufficient separation of the gaseous phase from the LPG fuel. As standard,
LPG dispensers are equipped with DISH nozzle (nozzle connector) most used in Europe. At the customer's request, the dispenser
can be equipped with ACME nozzle (Belgium, Germany, Ireland and Austria), BAYO or EURO (Spain, Portugal).
Pictures (PNG, DWG) with dimensions of all models can be downloaded here: https://www.tatsuno‐europe.com/_en/download/.
1
1
1
1
2
1
2
1
2
2
2
2
1
2
1
2
2
3
2
3
61
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
4
4
4
4
1
1x50
1
1x50
2
2x35
2
2x35
2
2x50
2
2x50
2
2x50
2
2x50
4
2x50 + 2x35
4
2x50 + 2x35