Table of Contents
Advertisement
2.5.9. OCEAN EURO LPG DISPENSERS
OCEAN EURO LPG dispensers are produced only in a pressure version, i.e., without a pump, in a single‐
sided left (L), single‐sided right (R) or double‐sided (D) version with one to four delivery hoses for LPG
(liquefied propane butane) delivery. Delivery hoses are free hanging or fitted with a reel (‐HR) and are
terminated by front‐mounted delivery nozzles. The design of dispensers can be basic or one of the specific
variants CUBE, FIN or WAVE. List of standard OCEAN EURO LPG models:
Dispenser model
BMP4011.OEL(R) /LPG
BMP4011.OEL(R) /LPG‐HR
BMP4012.OED /LPG
BMP4012.OED /LPG‐HR
BMP4022.OED /LPG
BMP4022.OED /LPG‐HR
BMP4022.OEL(R) /LPG‐2C
BMP4034.OED /LPG‐4C
Notes: The pumping performance depends on the conditions at the station (pump distance, pump pressure ... etc). Standard
pumping performance for models with one inlet, one hose (11) and two inlets, two hoses (22) is 50 L/min. For models with one
input, two hoses (12) the performance is 35 L/min. Note that when exceeding the maximum operating pressure of 18 bar (0.18
MPa), higher pumping performance may also occur but also a lack of separation of the gaseous phase from the LPG fuel. By
default, LPG dispensers are equipped with DISH standard connector most widely used in Europe. At customer's request, the
dispensers can be equipped with ACME standard nozzles (Belgium, Germany, Ireland, and Austria), BAYO, or EURO nozzles (Spain,
Portugal). Pictures (PNG, DWG) with dimensions of all models can be downloaded here:
europe.com/_en/download/.
Design variant í WAVE
(BMP4012.OED/LPG/WAVE)
1
1
2
2
2
2
1
2
Design variant CUBE
(BMP4012.OED/LPG/CUBE)
Figure 15 ‐ Design variants of OCEAN EURO LPG dispensers
48
TATSUNO EUROPE a.s., www.tatsuno‐europe.com
1
1
1
1
1
2
1
2
2
2
2
2
2
2
3
4
1
1
1x50
1
1
1x50
2
2
2x35
2
2
2x35
2
2
2x50
2
2
2x50
2
2
2x50
4
4
2x50 + 2x35
https://www.tatsuno‐
Design variant FIN
(BMP4012.OED/LPG/FIN)
Advertisement
Table of Contents
