4.2. TBELTM COUNTER
The TBELTM electronic counter in the same way as the PDEX5 counter, see chapter 4.1, by remote
controllers PDERT‐5S (service) and PDERT‐5O (manager), which can be used to:
read non‐resettable electronic quantity totalizers of all delivery hoses
read and reset daily electronic quantity and financial totalizers of all hoses
setting of unit prices of products (in manual operation)
reading and setting of operating parameters of the dispenser
The operator and manager mode of the TBELTM counter is almost the same as in the PDEX5 counter
(chapter 4.1). The difference is only in a few parameters ‐ see below.
Table 27 ‐ List of parameters of the operator access mode of the TBELTM counter
Parameter Meaning
01
Non‐resettable quantity totalizers
02
Daily quantity totalizers
03
Product unit prices (in manual mode)
04
Current time and date
05
Program version and CRC (check sums)
06
Error message code history
07
Fuelling history
Table 28 ‐ List of parameters of the manager access mode of the TBELTM counter
Parameter Meaning
01
Non‐resettable quantity totalizers
02
Daily quantity totalizers
03
Product unit prices (in manual mode)
04
Current time and date
05
Program version and CRC (check sums)
06
Error message code history
07
Fuelling history
08
Manager mode access password
09
Maintenance history
10
Peripheral unit serial numbers
11
‐ not used ‐
12
Dispenser control mode
13
Error message code statistics
14
Current product temperature
15
Daily totalizers reset
126
TATSUNO EUROPE a.s., www.tatsuno‐europe.com
Corresponding PDEX5 parameter / Differences
P00
P02 / quantity totalizers only
P03
P04
P05
P20 / 100 error message code records
P25 / 50 fuelling history records
Corresponding PDEX5 parameter / Differences
P00
P02 / quantity totalizers only
P03
P04
P05
P20 / 100 error message code records
P25 / 50 fuelling history records
P08
P29 / 50 records
P10, see 4.2.1
‐
P12
P21
P14 / + temperature near the processor
P15