Fuel Dispensers TATSUNO EUROPE ‐ Installation and User Manual , revision 10, January 2022
2.5.15. OCEAN TOWER DISPENSERS
Multi‐product OCEAN TOWER dispensers are standardly manufactured in a suction version in a single‐
sided left (L), single‐sided right (R) or double‐sided (D) design with one to ten delivery hoses for liquid fuel
(gasoline, diesel, E85 ...) located on the front of the dispenser. The dispensers are equipped with hose
retractor system.
List of standard OCEAN TOWER models:
Dispenser model
BMP4011.OWL(R)
BMP4012.OWD
BMP4022.OWL(R)
BMP4024.OWD
BMP4033.OWL(R)
BMP4036.OWD
BMP4044.OWL(R)
BMP4048.OWD
BMP4055.OWL(R)
BMP40510.OWD
Notes: The pumping performance is strongly dependent on the conditions at the station (distance from the tank, suction height,
pipe inner diameter... etc.). The standard pumping performance is within the range of 35 to 50 L/min. For special models (see
chapter 2.4), the performance of the diesel hoses can be increased to a high performance of 70 to 90 L/min (/H) or ultra‐high
performance from 120 to 150 L/min (/UH). When using a special meter (LOBE), the pumping performance can be increased up to
170 L/min and in a pressure version up to 200 L/min, depending on the submersible pump power. Special models marked ‐2C and
‐4C can simultaneously deliver two liquid fuels on one side of the dispenser. Dispensers can also be produced in a pressure version
without pumps (/S3) where the central submersible pump is in the storage tank and pushes the fuel into the dispenser via a
pressure line. According to the number of gasoline products, dispensers can be equipped with a vapour recovery system (/VR,
/VR2, /VR3...) of the 2nd level and optionally with an electronic system that monitors the correct function and efficiency of the
recovery system. Delivery nozzles are standardly placed on the front of the dispenser. In the case of a single‐product diesel model,
it is also possible to have a version with a side‐mounted nozzle (‐ZV1). For each dispenser model it is possible to provide one or
two hoses for satellite delivery. This allows one delivery (one transaction) from two hoses at a time. The dispenser with an output
for the satellite hose is supplemented with /MAS abbreviation and the dispenser with a satellite hose with /SAT abbreviation.
Pictures (PNG, DWG) with dimensions of all models can be downloaded here: https://www.tatsuno‐europe.com/_en/download/.
1
1
2
1
1
2
2
2
1
3
2
3
1
4
2
4
1
5
2
5
59
1
1
2
2
2
2
4
4
3
3
6
6
4
4
8
8
5
5
10
10
1
2
1
2
1
2
1
2
1
2