Fuel Dispensers TATSUNO EUROPE ‐ Installation and User Manual , revision 10, January 2022
2.5.5. SHARK ECONOMY LPG DISPENSERS
SHARK ECONOMY LPG dispensers are produced only in a pressure version, i.e., without a pump, in a single‐
sided left (L) or double‐sided (D) version with one or two free‐hanging delivery hoses for LPG (liquefied
propane butane) delivery. The delivery nozzles may be located on the front (‐ZV2) or on the side of the
dispenser. List of standard SHARK ECONOMY LPG models:
Dispenser model
BMP522.SXL /LPG
BMP512.SXL /LPG
BMP522.SXD /LPG
BMP522.SXD /LPG
BMP522.SXD /LPG‐ZV2
BMP522.SXD /LPG‐ZV2
Notes: The pumping performance depends on the conditions at the station (pump distance, pump pressure ... etc). Standard
pumping performance for models with two inlets, two hoses (22) is 50 L/min. For models with one input, two hoses (12) the
performance is 35 L/min. Note that when exceeding the maximum operating pressure of 18 bar (0.18 MPa), higher pumping
performance may also occur but also a lack of separation of the gaseous phase from the LPG fuel. By default, LPG dispensers are
equipped with DISH standard connector most widely used in Europe. At customer's request, the dispensers can be equipped with
ACME standard nozzles (Belgium, Germany, Ireland, and Austria), BAYO, or EURO nozzles (Spain, Portugal).
Pictures (PNG, DWG) with dimensions of all models can be downloaded here: https://www.tatsuno‐europe.com/_en/download/.
1
1
2
2
2
2
BMP522.SXD /LPG‐ZV2
Figure 9 – Standard SHARK ECONOMY LPG models
41
2
2
2
1
2
2
2
2
2
1
2
2
2
2
2
1
2
2
2
50+50
2
35+35
4
50+50
4
35+35
2
50+50
2
35+35