Description Of The Pdedil V6 Display - tatsuno OCEAN TOWER Series Installation And User Manual

5.3.13. DESCRIPTION OF THE PDEDIL V6 DISPLAY
The LCD display consists of the following parts:
Display segment Function
Amount delivered
Volume delivered
Delivered fuel unit price
Minimum Measured Quantity
Temperature volume compensation
(ATC)
High and low output signals (fuel
flow)
Function and fault indication of the
vapour recovery system
Dispenser status indication ‐ released
for delivery / blocked
Signalling of forced termination of
delivery
Fault signalling or maintenance
required.
TATSUNO EUROPE a.s., www.tatsuno‐europe.com
Note
‐ for P12=0 it can display the value from € 0 to 99999.9
‐ for P12=1 it can display the value from € 0 to 999999.9
‐ for P12=0 it can display the value from 0 to 9999.99 L
‐ for P12=1 it can display the value from 0 to 99999.99 L
‐ for P12=0 it can display the value from 0 to 99.99 €/L
‐ for P12=1 it can display the value from 0 to 999.99 €/L
‐ the display is set by parameter P91 for each delivery hose
‐ it appears automatically during delivery if the temperature
compensation function is activated for the delivered product
‐ it appears automatically before or during delivery when the
MAX button is pressed (see 5.3.11) or the MIN button is
pressed (see 5.3.12).
‐ it appears when vapour recovery is activated or a vapour
recovery system error has occurred (see 5.3.5)
‐ it appears automatically when the dispenser status changes
‐ it appears after the STOP command has been received from
the booth, after the preset number / preset amount has been
reached or after the allowed time without delivery has been
exceeded
‐ it will be displayed at each fault indication together with the
fault code (see 6.2.1)
152