Fuel Dispensers TATSUNO EUROPE ‐ Installation and User Manual , revision 10, January 2022
If an employee detects a tool unsuitable in terms of safety, he/she must immediately remove the
defect. If the defect removal is not within the employee`s job content or if an employee does not
have enough knowledge for its removal, he/she must immediately inform his/her superordinate.
The same applies also to the following:
Working materials that are not properly packed or correctly described so that they correspond
to safety requirements.
Working methods and processes that are not correctly coordinated or checked so that they
correspond to safety requirements.
If dangerous procedures are performed by several persons, permanent flawless communication
between them is necessary to prevent hazardous situations. In such a case a person must be
appointed and authorized to perform overall supervision.
1.4.3. DANGER
Before starting work, the dispenser must be insulated (i.e. completely disconnected from the power
supply) and the main switch must be switched off. The submersible pump (if used) and the control signals
from the dispenser must also be insulated. This ensures technician safety. As a further precaution, turn
off the main power supply in the fuel station booth and place there a clear warning to prevent it from
being accidentally switched on. It is not allowed to turn on the dispenser before it is checked and approved
by an authorized technician. This authorization is subject to the relevant national legislation. Removed
packaging and facing material must be stored in such a way as to prevent damage to parts and personal
injury. Covers that can be opened, such as the counter box, should be handled with care. Ensure that the
fuse is in the correct position to prevent the lid from falling off on the head of the service technician or
another person. For unmanned fuel stations, the Installation and User Manual must be available to all
end‐users. It should be placed visibly on the notice board and illuminated enough to be readable at night.
For unmanned fuel stations, breakaway couplings must also be used to reduce the risk in the case of
departure after the delivery nozzle has been forgotten in the vehicle tank.
WARNING
Only qualified personnel authorized to do so may perform connecting and disconnecting to/from the
electrical system. Work in hazardous areas must be ensured by complying with all applicable legal standards.
1.4.4. PERSONAL PROTECTIVE EQUIPMENT
Protective clothing
The following clothing must always be worn during dispenser installation and maintenance:
Protective helmet.
Protective footwear (conductive).
Protective leather gloves.
Anti‐static clothing.
Eye protection.
Protective equipment for work in a hazardous environment
15