Description Of Pdert-5O Remote Controller - tatsuno OCEAN TOWER Series Installation And User Manual

Fuel Dispensers TATSUNO EUROPE ‐ Installation and User Manual , revision 10, January 2022
The operator mode is designed for the operators of the fuel station. It only allows you to read the
values of the electronic totalizers and values of the basic parameters of the dispensers. It does not
allow you to reset or change the parameter values.
The manager mode is designed for the manager of the fuel station. It allows you to read the values
of the electronic totalizers and set the basic operating parameters of the dispenser. The access to the
Manager mode is protected by password.
4.1.1. DESCRIPTION OF PDERT‐5O REMOTE CONTROLLER
The keyboard of the PDERT‐5O remote manager`s controller is described on Figure 78. While using the
remote controller it is necessary to move the remote controller closer to the distance of approx. 1 meter
from the centre of the dispenser display. In the electronic counter, the dispensing hoses (L1...L5, R1...R5)
and the products (P1...P5) are marked with the numbers 1, 2, 3... .9, 10, see Figure 77.
Figure 77 – Range of operation of the remote controller and marking of hoses (Lx, Rx) and dispenser products (Px)
(IR ‐ position of infrared receiver on the display)
111