2.4. DISPENSER MODEL IDENTIFICATION
The following paragraph explains the marking method (codes) of dispensers.
The basic design of the OCEAN and SHARK series business branding is:
1
2
3 4
BMP 4 0 4 8 . O W D /H/VR2 + MOD 4 0 1 2 . O W D /AdB + ...
A stand‐alone dispenser always starts with a BMP abbreviation followed by a clarification of the dispenser
configuration and design. As for the combined dispenser, i.e. the dispenser with one or more additional
dispensing modules, the individual modules are marked with the MOD abbreviation and specification of the
module configuration.
Field
Values
Description
1
‐‐‐‐‐‐‐‐‐‐‐>
Device type
BMP
Dispenser. Standalone dispenser.
MOD
Dispensing module. Measuring and dispensing system without an electronic counter. It does not work independently.
The dispensing modules are only in OCEAN EURO or OCEAN TOWER versions.
2
‐‐‐‐‐‐‐‐‐‐‐>
Series of dispensers
5
SHARK. Simple single‐product to two‐product dispensers of the SHARK JUNIOR and SHARK ECONOMY series.
40
OCEAN. Single to five‐product dispensers of the OCEAN EURO, OCEAN TALL, OCEAN SMART, OCEAN TOWER series.
3
1.2 to 5
Number of products. Number of fuel pumps or number of fuel inputs for pressure dispensers.
4
1, 2 to 10
Number of delivery hoses. It corresponds to the number of measuring systems.
5
‐‐‐‐‐‐‐‐‐‐‐>
Dispenser design.
S
SHARK JUNIOR dispensers. Single‐product, one‐ to two‐hose dispensers with a height of 1400 mm.
SX
SHARK ECONOMY dispensers. Two‐product, one‐ to two‐hose dispensers with a height of 1400 mm.
OE*
OCEAN EURO dispensers. Multi‐product, one‐ to ten‐hose dispensers with a height of 1900 mm.
OT*
OCEAN TALL dispensers. Multi‐product, one‐ to ten‐hose dispensers with a height of 2300 mm.
OS
OCEAN SMART dispensers. Single‐product, one‐ to four‐hose dispensers with a height of 1900 mm.
OW
OCEAN TOWER dispensers. Multi‐product, one‐ to ten‐hose dispensers with a height of 1900 mm.
6
‐‐‐‐‐‐‐‐‐‐‐>
Dispenser orientation
D
Double‐sided dispenser.
L
Single‐sided dispenser – left.
R
Single‐sided dispenser – right.
7
‐‐‐‐‐‐‐‐‐‐‐>
Specifying abbreviation
‐ without ‐
The dispenser or module for pumping liquid fuels (gasoline, diesel, ...).
/LPG
The LPG (liquefied propane‐butane) dispenser or module.
/AdB
AdBlue® (AUS32 reducing agent) dispenser or module
/WSE
Dispenser or module for WSE (windshield washer fluid dispensing).
/AdB&Die
Dispenser with combined delivery of AdBlue and liquid fuel (diesel).
/CNG
CNG (compressed natural gas) dispenser or module.
/NoEx
The dispenser must be positioned out of reach of the fuel dispensers
/NoHeat
The AdBlue dispenser/module is not equipped with heating
‐ZV1
The dispenser where the hose exits from the rear cover and the nozzle is also located on the rear cover, see figure.
‐ZV2
The dispenser where the hose exits from the rear cover and the nozzle is located on the front of the dispenser
/H
Increased power of one fuel pump (80L/min) or increased filling power of one CNG hose (<70 kg/min).
If several pumps with increased power are used in the rack, use /H/H or /H/H/H.
/UH
Ultra‐high performance of one delivery hose (120 to 150L/min). For two hoses in the dispenser, the /UH/UH is used.
/VRx
The number of exhausted products in the fuel dispenser where x = 1, 2, 3, 4 or 5.
/S3
Pressure dispenser. The dispenser does not contain a pump. The submersible pump is located in the tank.
/MAS
A dispenser with one output for a satellite stand. If two satellite outlets are in the dispensers, /MAS/MAS is used.
/SAT
A dispenser with a satellite delivery hose. If two satellite hoses are used in the dispenser, /SAT/SAT is used.
/LON; /TAT
Data communication IFSF‐LON; data communication TATSUNO SUNNY (RS485)
/CUBE; /FIN;
Design variants of the dispenser created by adding decorative elements to the base version of the dispenser (OCEAN
/WAVE
dispensers only).
‐HS; ‐HR
A spring hose holder (SHARK); hose reel (OCEAN)
‐SC
Simultaneous delivery of hoses on a two‐hose dispenser.
‐NC
Non‐simultaneous delivery of hoses on a two‐hose dispenser.
‐2C
Simultaneous delivery of two delivery hoses on one side of the multi‐product dispenser.
‐4C
Simultaneous pumping of four delivery hoses on a double‐sided multi‐product dispenser.
/* Note: Serial production of the OCEAN EURO and OCEAN TALL series dispensers was terminated in October 2020.
5
6
7
TATSUNO EUROPE a.s., www.tatsuno‐europe.com
1
2
3 4
30
5
6
7