2.5.6. SHARK ECONOMY ADBLUE® DISPENSERS
SHARK ECONOMY ADBLUE® dispensers are standardly manufactured in a pressure version, single‐sided
left (L) or double‐sided (D) version with two delivery hoses for the delivery of AdBlue® reduction agent
(32.5% urea solution; AUS32). The hoses are freely hanging or hung by a spring hinge (HS). The maximum
pumping performance of the delivery hoses is 40 L/min for trucks or 10 L/min for passenger cars.
List of standard SHARK ECONOMY ADBLUE® models:
Dispenser model
BMP512.SXL /AdB
BMP512.SXL /AdB‐NC
BMP512.SXD /AdB
BMP512.SXD /AdB‐NC
Note: SHARK ECONOMY ADBLUE® dispensers are not standardly equipped with heating. For the installation of dispensers in an
environment where the temperature drops below ‐5 °C, it is necessary to equip the dispenser at the customer's request by heating
the hose, nozzle boot and the hydraulic part of the dispenser. For dispensers with heated hoses, it is also recommended to use
spring hose hinges (abbreviation "HS") to avoid hose contact with the ground and hence reduce heating efficiency.
The maximum pumping performance Q
the dispensing hose type. It can be reduced by means of an electromagnetic proportional valve located in the dispenser to the
selected lower value. For pumping into passenger cars, it is recommended to use a maximum flow rate in the range of
Q
= 5 to 7 L / min. for smoother pumping into a small tank in the vehicle.
max
AdBlue® dispensers marked /NoEx are not designed for installation near fuel dispensers. The dispensers marked /Ex can be
installed in zone 2 (according to EN 60079‐10‐1)
Pictures (PNG, DWG) with dimensions of all models can be downloaded here: https://www.tatsuno‐europe.com/_en/download/.
1
1
2
2
= 40 L/min is mainly dependent on the submersible pump used in the storage tank and
max
generated by other fuel (petrol, diesel) or LPG equipment.
42
TATSUNO EUROPE a.s., www.tatsuno‐europe.com
1
2
2
1
1
2
1
2
2
1
1
2
2
40/10
1
40/10
4 (2+2)
40/10
2 (1+1)
40/10