Fuel Dispensers TATSUNO EUROPE ‐ Installation and User Manual , revision 10, January 2022
2.5.4. SHARK ECONOMY DISPENSERS
SHARK ECONOMY dispensers are standardly manufactured in a suction version in a single‐sided left (L) or
double‐sided (D) design with one or two delivery hoses for liquid fuel (gasoline, diesel, E85 ...) ended with
delivery nozzles located on the side of the dispenser. The hoses may be freely hanging or hung by a spring
hinge (HS).
List of standard SHARK ECONOMY models:
Dispenser model
BMP522.SXL
BMP522.SXL‐NC
BMP522.SXD
BMP522.SXD‐NC
BMP522.SXL /H
BMP522.SXL /H‐NC
BMP522.SXD /H
BMP522.SXD /H‐NC
BMP522.SXL /UH
BMP522.SXL /UH‐NC
BMP522.SXD /UH
BMP522.SXD /UH‐NC
BMP522.SXL /UH/H
BMP522.SXL /UH/H‐NC
BMP522.SXD /UH/H
BMP522.SXD /UH/H‐NC
Notes: Special models (see chap. 2.4) can also be produced in a pressure version without pumps (/ S3) where the submersible
pump is located in the storage tank and pushes the fuel into the dispenser via a pressure line. According to the number of gasoline
products, dispensers can be equipped with a vapour recovery system (/VR1, /VR2) of the 2nd level and optionally with an electronic
system that monitors the correct function and efficiency of the recovery system. For each dispenser model it is possible to provide
one or two hoses for diesel delivery. This allows one delivery (one transaction) from two hoses at a time. The dispenser with an
output for the satellite hose is supplemented with /MAS abbreviation and the dispenser with a satellite hose with /SAT
abbreviation. The pumping performance is strongly dependent on the conditions at the station (distance from the tank, suction
height, pipe inner diameter... etc.). The standard performance ranges from 35 to 50 L/min, increased performance from 70 to 90
L/min and ultra‐high performance from 120 to 150 L/min. When using a special meter (LOBE), the ultra‐high pumping performance
can be increased up to 170 L/min and in a pressure version up to 200 L/min. (depending on the submersible pump power).
Pictures (PNG, DWG) with dimensions of all models can be downloaded here: https://www.tatsuno‐europe.com/_en/download/.
1
2
1
2
2
2
2
2
1
2
1
2
2
2
2
2
1
2
1
2
2
2
2
2
1
2
1
2
2
2
2
2
39
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
2
2
2
3
2
2
2
3
2
2
2
3
2
2
2
2
40+40
1
40+40
4
40+40
2
40+40
2
80+40
1
80+40
4
80+40
2
80+40
2
130+40
1
130+40
4
130+40
2
130+40
2
130+80
1
130+80
4
130+80
2
130+80