Electromagnetic Compatibility (Emc) - tatsuno OCEAN TOWER Series Installation And User Manual

TATSUNO EUROPE a.s., www.tatsuno‐europe.com
with the European directive ATEX No. 2014/34/EU. For the liquid dispensers located in a potentially explosive
area the European type certificate called the ATEX certificate was issued – see Table 7.
The compliance assessment for compressed natural gas (CNG) dispensers and archiving of the
documentation pursuant to Section 10(1)(b), point 2 of the Government Order No. 116/2016 Coll. article
13(1)(b)(ii) of the Directive 2014/34/EU of the European Parliament and Council was performed in the
Physical‐Technical Testing Institute, s.p., Ostrava – Radvanice under archival number A484 ‐16. In terms
of pressure safety, EU verification of the unit (Procedure G) is performed at each CNG dispenser according
to the Appendix No. 3, point 11 of the Government Decree No. 26/2003 Coll. as amended (Appendix No.
III, point 10 of the European Parliament and Council Directive No. 2014/68/EU) by the notified entity No.
1017 TÜV SUD Czech s.r.o., Novodvorská 994, 142 21 Prague 4.
Each dispenser is subjected to electrical tests (connection integrity, insulation resistance, high voltage
test, end cap resistance to the earthing point of the dispenser) during the manufacturing process, pressure
tests and an operating pressure test. The results of all tests are recorded in the production documentation
or a protocol (LPG, CNG) is issued.
TATSUNO EUROPE a.s. received from the Notification of quality assurance No. FTZÚ 02 ATEX Q030 for fuel
dispensers and accessories from the Physical‐Technical Testing Institute in Ostrava ‐ Radvanice. The validity of
this notification is checked by audits annually.
2.2.3. ELECTROMAGNETIC COMPATIBILITY (EMC)
All TATSUNO EUROPE dispensers have been certified by the Czech Metrology Institute in Brno, notified
body No. 1383. The conformity assessment of the equipment was carried out in accordance with the
Directive 2014/30/EU of the European Parliament and Council and in accordance with the Government
Order No. 117‐2016 on conformity assessment of products in terms of electromagnetic compatibility and
in accordance with OIML R117 and OIML R139.
26