How to read the electronic totalizers:
You can only display the value of the totalizers on the counter display if all the nozzles are hung
and the previous delivery is paid.
Press and hold the buttons 3 and 4 simultaneously for at least 3 seconds.
The nozzle number appears on the bottom
line. The upper and middle lines display the
totalizer value (the upper line shows higher
orders).
Use the 1(+) and 2(‐) buttons to
change the nozzle number.
To end the display of the totalizer,
press the button 4 (Cancel).
4.4.3. CHANGE OF THE WORKING MODE
Changing the dispenser working mode must be performed when the dispenser is disconnected from the
control system (e.g. in the event of a malfunction of the control system) when the dispenser is to be
operated manually or vice versa when the dispenser is in a manual mode and must be connected to the
control system.
How to change the working mode:
Turn the power supply of the dispenser
counter off and on.
During
the
counter
countdown), press and hold buttons 1
and 4 simultaneously until the letter "P"
flashes on the lower line indicating the
entry to the setting mode.
When the counter test is completed,
the parameter number P00 appears on
the bottom line.
The value of that parameter is displayed on the middle line.
Opening the parameter for editing is made by pressing the button 3 (Enter).
When the parameter is opened, its value flashes.
Change the parameter value with buttons 1 and 2 to 0 – for automatic mode or 1 – for manual mode.
To store the parameter value, press the button 3 (Enter).
The parameter setting mode is ended by pressing the button 4 for at least 2 seconds (Cancel).
test
(zero
130
TATSUNO EUROPE a.s., www.tatsuno‐europe.com
1
13
2
4438.56
3
tot 1
4
number
Nozzle
1
S E T U P
2
3
4
parameter no.
totalizer value
134438.56 l
€
L
€/L
parameter value
€
1
L
P 00
€/L